제품소개
기술현황
기술자료실
고객문의
제품소개
기술현황
기술자료실
고객문의
GAS DETECTOR 원천기술을 이용한 IT기반의 가스모니터링시스템 구축
제품상세설명
- Diffusion gas detector equipped with toxic and oxygen-sensitive sensors.
- Gas detector with a dedicated gas detection principle, providing excellent selectivity and
minimal interference from other gases by reacting specifically to the target gas.
- IP66 and Internal pressure explosion-proof certified by IECEx, ATEX, and KGS.
- Calibration and program settings: ZERO point, Span (Automatic Setting with no volume required except for 4–20mA).
- Calibration and maintenance by a single person.
- Minimization of the impact of noise, temperature, and humidity.
- Connection of the analog standard output (4–20mA) signal to DCS & PLC monitoring systems.
- Install the system in hazardous areas at industrial sites to measure combustible gases in real-time, providing a
4–20mA standard output for connection to control devices, alarm devices, and monitoring systems.
Model No.
Measuring gas
TOXIC GAS (CO, CL2, NH3, H2S,NO, NO2, CO2 etc.)
O2 (Oxygen)
Measuring range
0~PPM – Toxic gas
(Refer to the range for toxic gases)
0~25%(Vol)-Oxygen
Application sensor
NDIR (Infrared)
Semiconductor
Measuring signal
4~20mA (Transmitter)
Response time
Within 15~45 seconds
(Depends on sensor type)
Accuracy
±2%/Full scale
Operating temp´/humi´
-20℃ ~ +40℃ / 90% RH (Non-condensing)
(Depends on sensor type)
Operating power
21~31V.DC, 75mA
Consumption
electric power
1.4W (Alarm 2.4W)
Cable/Distance
Conduit connection
cable
3/4-14 NPT
Mounting type
Approval
Dimension
Weight
